+7 (812) 309 34 73. Договоримся!
Общая информация (SPA-8XCHT1/E1)
The Cisco 8-Port Channelized T1/E1 SPA SPA-8XCHT1/E1 provides one of the greatest densities currently offered in the industry at 8 ports per SPA and up to 32 ports per SIP. At a cost per T1/E1 port less than that of a standard serial port with external channel service unit/data service unit (CSU/DSU), the Cisco 8-Port Channelized T1/E1 SPA is cost-effective for all WAN connectivity.
Быстрые спецификации
На рисунке 1 показан внешний вид SPA-8XCHT1/E1.
Таблица 1 показывает быстрые спецификации.
|
Model |
SPA-8XCHT1/E1 |
|
Description |
Cisco ASR 9000 Adapter, SPA-8XCHT1/E1, 8-port Channelized T1/E1 to DS0 Shared Port Adapter |
|
Product Name |
Cisco 8-Port Channelized T1/E1 Shared Port Adapter |
|
Product compatibility |
Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router |
|
Port density per SPA |
8 ports |
|
Physical interface |
• RJ-45 connector • RJ-45 to BNC adapter cable option |
Supported Devices
Table 2 shows the supported ASR 9000 routers.
|
Model |
Description |
|
ASR-9010-DC |
Cisco ASR 9010 DC chassis |
|
ASR-9010-AC |
Cisco ASR 9010 AC chassis |
|
ASR-9010-AC-V2 |
ASR 9010 AC Chassis with PEM Version 2 |
|
ASR-9010-DC-V2 |
ASR 9010 DC Chassis with PEM Version 2 |
|
ASR-9006-DC |
Cisco ASR 9006 DC chassis |
|
ASR-9006-AC |
Cisco ASR 9006 AC chassis |
|
ASR-9006-AC-V2 |
ASR 9006 AC Chassis with PEM Version 2 |
|
ASR-9006-DC-V2 |
ASR 9006 DC Chassis with PEM Version 2 |
Сравнить похожие товары
В таблице 3 показано сравнение между SPA-8XCHT1/E1 and SPA-8XOC12-POS.
|
Product Code |
SPA-8XCHT1/E1 |
SPA-8XOC12-POS |
|
Description |
Cisco ASR 9000 Adapter, SPA-8XCHT1/E1, 8-port Channelized T1/E1 to DS0 Shared Port Adapter |
Cisco ASR 9000 Adapter, SPA-8XOC12-POS, 8-port OC12/STM4 POS Shared Port Adapters |
|
Product Name |
Cisco 8-Port Channelized T1/E1 Shared Port Adapter |
Cisco 8-Port OC-12c/STM-4 POS SPA |
|
Product compatibility |
Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router |
Cisco ASR 9000 Series Router |
|
Port density per SPA |
8 ports |
8 ports |
Что бы получить больше информации
У вас есть какие-либо вопросы о SPA-8XCHT1/E1 adapter?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Physical interface | • RJ-45 connector • RJ-45 to BNC adapter cable option |
| Product compatibility | Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router |
| Port density per SPA | 8 ports |
| Protocols | Encapsulation protocols: • HDLC • Point-to-Point Protocol (PPP), RFC 1662 • Frame Relay, RFC 1490 Multilink support: • MLPPP, RFC 1990 • MLFR, FRF.16 • LFI over Frame Relay (FRF.12) and MLPPP |
| Features and functions | • Up to 8 independent T1 or E1 ports configurable as either all T1 or all E1 only • Full-duplex connectivity • Channelized and fractional T1/E1, clear channel E1 supported • Up to 256 usable n x 64K, where n is 1 to 24 for T1 and 1 to 32 for E1 • Line-rate performance for all ports channelized to DS-0 • Integrated CSUs/DSUs • Internal or network clocking selectable on each port • Per-port, dual-color status LED • Loopback capabilities: • Local and remote loopback at the T1/E1 level • Response to embedded loopback commands • Insertion of loopback commands into transmitted signal • N x DS-0 system-side loopback • Bit-error-rate-testing (BERT) pattern generation and detection per channel (maximum of 6 T1/E1 at a time) • Programmable pseudorandom pattern up to 32 bits long, including all 0s, all 1s, 211, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, alternating 0s and 1s, 1-in-8, and 3-in-24 • 32-bit error-count and bit-count registers • Fully independent transmit and receive sections • Detection of test patterns with bit error rates up to 10-2 • 24-hour history maintained for error statistics and failure counts, at 15-minute intervals • 16- and 32-bit cyclic redundancy check (CRC); 16-bit default |
| Network management | Simple Network Management Protocol (SNMP) |
| Compliance and agency approvals | CE Marking Safety • UL 60950 • CSA 22.2 No.60950 • IEC 60950 • EN 60950 • AS/NZS 3260 • TS001 EMC • CFR47 • Part 15 • ICES 003 • EN55022 • CISPR 22 • AS/NZ 3548 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 Telecom (T1) • ANSI T1.403 Telecom (E1) • ITU G.703 • G.704 • G.706 |
| Environmental specifications | • Operating temperature: 41 to 104°F (5 to 40°C) • Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity |
| Reliability and availability | • OIR • Single SPA software reset |
| MIBs | RFC 1406 MIB |
| Description | Cisco ASR 9000 Adapter, SPA-8XCHT1/E1, 8-port Channelized T1/E1 to DS0 Shared Port Adapter |
| Product Name | Cisco 8-Port Channelized T1/E1 Shared Port Adapter |
| T1-specific features | • Data rate to 1.536 Mbps per port • Impedance: 100 ohms • D4 Super Frame (SF) or Extended Super Frame (ESF) framing • Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding • ANSI T1.403 and AT&T TR 54016 Facility Data Link (FDL) • Selectable T1 cable length in increments from 0 to 655 feet • Selectable T1 CSU line build-out (LBO): 0, -7.5, -15, and -22.5 dB • Selectable T1 CSU receiver gain: 26 or 36 dB • Alarm monitoring: • Alarm indication signal (AIS) • Out of frame (OOF) • Far-end alarm failure (yellow or distant alarm) • Performance data collection: • CRC and bit errors • Framing bit errors • Line errored seconds • Far-end errored seconds • Far-end severely errored seconds • Far-end unavailable seconds • Line coding violation (LCV) |
| E1-specific features | • Data rate to 2.048 Mbps (unframed mode) or 1.984 Mbps (framed mode) per port • Impedance: 120 ohms (RJ-45 to BNC adapter cable offers 75-ohm configuration option) • Unframed E1, CRC4, or non-CRC4 framing • High-density bipolar with three zeroes (HDB3) line encoding • Alarm monitoring: • AIS • OOF • Remote alarm indication (RAI) • Performance data collection: • CRC and bit errors • Framing bit errors • Far-end block error (FEBE) • LCV |
Теги: SPA-8XCHT1/E1 Cisco