+7 (812) 309 34 73. Договоримся!
Общая информация (SPA-1XCHOC48/DS3)
SPA-1XCHOC48/DS3 is the Cisco ASR 9000 and XR 12000 Series Shared Port Adapter. This Cisco 1-Port Channelized OC-48/STM-16 SPA is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (Packet over SONET/SDH [POS], ATM, Ethernet, etc.) to be deployed on the same interface processor.
Быстрые спецификацииs
This figure shows the appearance of SPA-1XCHOC48/DS3.
Таблица 1 показывает Быстрые спецификацииs.
|
Model |
SPA-1XCHOC48/DS3 |
|
Type |
SPA-1XCHOC48/DS3 Cisco ASR 9000 Series & XR 12000 Shared Port Adapter |
|
Product compatibility |
Cisco XR 12000 Series Routers Cisco ASR 9000 Series Router |
|
Port density per SPA |
1-port Channelized OC-48/STM-16 |
|
Physical interface |
OC-48c/STM-16 Small Form-Factor Pluggable (SFP) optics module (refer to optical parameters in Table 2) Visual status indicators (LEDs):
|
|
Physical specifications |
|
|
Power |
|
Сравнение с аналогом
В таблице 2 показано сравнение между SPA-2XCHOC12/DS0 and SPA-1XCHOC48/DS3.
|
Model |
SPA-2XCHOC12/DS0 |
SPA-1XCHOC48/DS3 |
|
Type |
Cisco ASR 9000 Series Shared Port Adapter |
SPA-1XCHOC48/DS3 Cisco ASR 9000 Series & XR 12000 Shared Port Adapter |
|
Product compatibility |
Cisco ASR 9000 Series Router |
Cisco XR 12000 Series Routers Cisco ASR 9000 Series Router |
|
Port density per SPA |
2-port channelized OC-12/STM-4 |
1-port Channelized OC-48/STM-16 |
Что бы получить больше информации
У вас есть какие-либо вопросы о Cisco SPA-1XCHOC48/DS3?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Physical interface (Channelized OC-48) | OC-48c/STM-16 Small Form-Factor Pluggable (SFP) optics module (refer to optical parameters in Table 2) Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback |
| SONET errors, alarms, and performance monitoring | Synchronization • Local (internal) or loop timed (recovered from network) • Pointer activity monitoring Local (diagnostic) and line (network) loopback Payload mapping • POS with 1 + X^43 self-synchronous scrambler SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LoS) • Loss of frame (LoF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Error counts for B2 • TCA for B2 • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LoP) • Positive stuffing event (PSE) Negative stuffing event (NSE) Path unequipped indication signal (PUNEQ) Path payload mismatch indication signal (PPLM) |
| Product compatibility | Cisco XR 12000 Series Routers Cisco ASR 9000 Series Router |
| Port density per SPA | 1-port Channelized OC-48/STM-16 |
| Protocols | • IETF RFC 1490, Frame Relay Encapsulation • RFC 1662, Point-to-Point Protocol (PPP) in High-Level Data Link Control (HDLC)-like framing • Cisco HDLC • PPP, HDLC, and Frame Relay User Network Interface (UNI) encapsulations |
| Features and functions | DS3 • Full- and half-duplex connectivity at DS-3 rate (44.736 MHz) • Scrambling and subrate support of major data-service-unit (DSU) vendors • C-bit or M23 framing in DS-3 mode • G.751 or G.832 in E3 mode • Support for 16- and 32-bit cyclic redundancy check (CRC) (16-bit default) • 24-hour history maintained for error statistics and failure counts • DS-3 alarm and event detection (once-per-second polling) • Alarm indication signal (AIS) • Out of frame (OOF) • Far-end receive failure (FERF) |
| Network management | • SONET-MIB (RFC 3592) • SONET/SDH-MIB (RFC 2558) • CISCO-SONET-MIB • DS-3/E3-MIB (RFC 3896) • Simple Network Management Protocol (SNMP) |
| Compliance and agency approvals | Safety • UL/CSA 60950-1 • IEC/EN 60950-1 • AS/NZS 60950.1 • EN60825/IEC60825 laser safety • 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety EMC • FCC Part 15 (CFR 47) • ICES 003 • CISPR 22 • AS/NZS CISPR22 • VCCI • EN55022 • EN55024 • EN300 386 • EN50082-1 • EN61000-6-1 Network Equipment Building Standards (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580 - NEBS: Criteria levels (Level 3 compliant) • GR-63-CORE - NEBS: Physical Protection • GR-1089-CORE - NEBS: EMC and Safety |
| Environmental specifications | • Operating temperature: 41 to 104°F (5 to 40°C) • Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity |
| Reliability and availability | • Online insertion and removal (OIR) • Field-replaceable SFP optical modules • 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols • Single SPA software reset |
| Physical specifications | • Weight: 1.27 lb (0.57 kg) • Height: 1.56 in. (3.96 cm) (double height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm) |
| Type | SPA-1XCHOC48/DS3 Cisco ASR 9000 Series & XR 12000 Shared Port Adapter |
| Power | • 1-port Channelized OC-48/STM-16 = 44W (with optics) |
Теги: SPA-1XCHOC48/DS3 Cisco