+7 (812) 309 34 73. Договоримся!
Общая информация (ASR-9006-DC-V2)
ASR-9006-DC-V2 is the Cisco ASR-9006 DC Chassis with PEM Version 2. The Cisco ASR 9000 Series has a modular power architecture available in both AC and DC. The power supplies are housed in field-serviceable Power Entry Modules (PEMs), which also come in AC and DC forms. Each PEM can hold up to threefour modules depending on its corresponding type, with no power zonesplacement restrictions (mixing of AC and DC supplies is not supported).
To provide ASR 9006 functions, ASR-9006-DC-V2 needs to be configured with necessary components separately.
Быстрые спецификацииs
This figure shows the Cisco ASR 9006 Router. To provide ASR 9006 functions, ASR-9006-DC-V2 needs to be configured with necessary components separately.
Таблица 1 показывает Cisco ASR-9006-DC Быстрые спецификацииs.
|
Model |
ASR-9006-DC-V2 |
|
Type |
Cisco ASR-9006 DC Chassis with PEM Version 2 |
|
ASR 9006 Specs |
|
|
Slots |
4 Line Cards |
|
Rack Size |
10 RU |
|
Max Capacity |
7 Tbps |
|
Size (H x W x D) |
17.5 in. x 17.5 in. x 28.65 in. |
|
Power |
AC: 3 kW power module |
|
Fan |
2 fan trays |
|
Airflow |
Side to Side (Front to Back Option) |
|
RSP / RP |
2 (1+1 RSP redundancy) |
|
Fabric Architecture |
1+1 fabric redundancy |
|
Software |
IOS XR |
Configuration
Table 2 shows some recommended components of ASR-9006-DC-V2.
|
Model |
Description |
|
ASR-9006-FAN |
ASR-9006-FAN Cisco ASR 9006 Series Fan Tray |
|
PWR-2KW-DC-V2 |
Cisco ASR 9000 Power Module PWR-2KW-DC-V2 2KW DC Power Module Version 2 for ASR-9006 & ASR-9010 Spare |
|
A9K-RSP440-TR |
Cisco ASR 9000 Route Switch Processor A9K-RSP440-TR ASR9K Route Switch Processor with 440G/slot Fabric and 6GB |
|
A9K-RSP440-SE |
Cisco ASR 9000 Route Switch Processor A9K-RSP440-SE ASR9K Route Switch Processor with 440G/slot Fabric and 12GB |
|
A9K-SIP-700 |
Cisco ASR 9000 Interface A9K-SIP-700 Cisco ASR 9000 Series SPA Interface Processor-700 |
|
A9K-24X10GE-SE |
Cisco ASR 9000 Series Router Ethernet Linecard A9K-24X10GE-SE ASR 9000 24-port 10GE, Service Edge Optimized LC (spare) |
|
A9K-2X100GE-SE |
Cisco ASR 9000 Series Router Ethernet Linecard A9K-2X100GE-SE ASR 9000 2-port 100GE, Service Edge Optimized LC (spare) |
|
A9K-2X100GE-TR |
Cisco ASR 9000 Series Router Ethernet Linecard A9K-2X100GE-TR ASR 9000 2-port 100GE, Packet Transport Optimized LC (spare) |
Сравнение с аналогом
В таблице 3 показано сравнение между ASR-9006-DC and ASR-9006-DC-V2.
|
Model |
ASR-9006-DC |
ASR-9006-DC-V2 |
|
Type |
Cisco ASR-9006 DC Chassis |
Cisco ASR-9006 DC Chassis PEM Version 2 |
|
Slots |
4 Line Cards |
4 Line Cards |
|
Rack Size |
10 RU |
10 RU |
Что бы получить больше информации
У вас есть какие-либо вопросы о Cisco ASR-9006-DC-V2?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Slot orientation | Horizontal |
| Cisco ASR 9000 Series RSP | Dual redundant RSPs with integrated fabric in 2 slots |
| Cisco ASR 9000 Series line cards | 4 line-card slots |
| “Commons” components | 2 RSPs 2 fan trays 1 PEM (either DC or AC) 1 fan filter |
| Rack mounting | 19-in. default 21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation |
| Cabinet mounting | Yes Note: Doors not recommended in enclosed cabinets |
| Wall mounting | No |
| Reliability and availability | Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy |
| Fabric | One per RSP: Active/active nonblocking operation mode in dual-RSP redundant configuration Fully redundant in dual-RSP redundant configuration Built-in service-intelligence and traffic-prioritization capability |
| Thermal | Two fan trays: 6 high-efficiency fans per tray Variable-speed fans for optimal thermal performance No single point of failure |
| Modularity | Pay-as-you-grow power for future scalability, available in AC and DC. Multiple power module types: 3 kW AC power module 2.1 kW DC power module Note: Mixing of AC and DC modules is not supported |
| Power zones | No power zone restrictions Fully load-sharing power infrastructure |
| Power-module airflow | Front-to-back |
| Operating temperature (short-term)[2] | ASR 9006: 23 to 131 F (-5 to 55 C) ASR 9010: 23 to 122 F (-5 to 50 C) |
| Storage temperature | -40 to 158 F (-40 to 70 C) |
| Storage (relative humidity) | 5 to 93% |
| ETSI standards | Cisco ASR 9006 is designed to meet: EN300 386: Telecommunications Network Equipment (EMC) ETSI 300 019 Storage Class 1.1 ETSI 300 019 Transportation Class 2.3 ETSI 300 019 Stationary Use Class 3.1 |
| EMC standards emission | Cisco ASR 9006 is designed to meet: FCC Class 47CFR15 A ICES 003 Class A AS/NZS CISRP22 Class A CISPR 22 (EN55022) Class A VCCI Class A BSMI Class A IEC/EN 61000-3-12: Power Line Harmonics IEC/EN 61000-3-11: Voltage Fluctuations and Flicker EN55022: Information Technology Equipment (Emissions) EN 50121-4: Railway EMC |
| EMC standards immunity | Cisco ASR 9006 is designed to meet: IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) IEC/EN-61000-4-3: Radiated Immunity (10V/m) IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) IEC/EN-61000-4-5: Signal Surge Ports (1kV) IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM) IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations EN55024: Information Technology Equipment (Immunity) EN50082-1/EN-61000-6-1: Generic Immunity Standard EN 50121-4: Railway EMC |
| Redundancy | AC: N+N redundancy DC: N+1 redundancy Power module redundancy A/B Feed redundancy |
| Physical specifications | Height: 17.50 in. (444.5 mm) (10 RU) Width: 17.38 in. (441.45 mm) Depth: With doors: 29.05 in. (737.9 mm) Without doors: 29.05 in. (737.9 mm) Weight: 89.55 lb (40.7 kg) (chassis with PEM) 150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs |
| Operating temperature (nominal) | 41 to 104 F (5 to 40 C) |
| Operating humidity (nominal) (relative humidity) | 5 to 90% |
| Description | Cisco ASR 9006 System ASR-9006-DC-V2 ASR 9006 DC Chassis with PEM Version 2 |
| Power input | Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum) Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
| Airflow | Right-to-back, Front-to-back with baffle |
| Safety | Cisco ASR 9006 is designed to meet: UL/CSA/IEC/EN 60950-1 IEC/EN 60825 Laser Safety ACA TS001 AS/NZS 60950 FDA Code of Federal Regulations Laser Safety |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9006 is designed to meet: SR-3580: NEBS Criteria Levels (Level 3) GR-1089-CORE: NEBS EMC and Safety GR-63-CORE: NEBS Physical Protection VZ.TPR.9205: Verizon TEEER |
| Operating altitude | -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
Теги: ASR-9006-DC-V2 Cisco