0
 0
  +7 (812) 309 34 73

по будням с 10:00 до 18:00

A9K-2X100GE-SE

Производитель: Cisco
Код товара: A9K-2X100GE-SE Cisco ASR 9000 Ethernet Linecard
0 отзывов
Артикул: ART4014
A9K-2X100GE-SE
По запросу
Сроки: 14 дней
Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Specification
Port density 2 ports of 100 Gigabit Ethernet per line card
Ethernet 100-Gbps IEEE 802.3ba compliant
100 Gigabit Ethernet PHY monitoring
IEEE 802.x flow control
Full-duplex operation
Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check
(CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
Physical dimensions (H x W x D); weight 14 x 1.72 x 20.5 in.; 14 lb (35.56 x 4.37 x 52.07 cm; 6.35 kg)
Reliability and availability Line card online insertion and removal (OIR) support without affecting the system
Storage temperature -40 to 158 F (-40 to 70 C)
Storage (relative humidity) 5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air
ETSI standards Cisco ASR 9000 Series Routers are designed to meet:
EN300 386: Telecommunications Network Equipment (EMC)
ETSI 300 019 Storage Class 1.1
ETSI 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
EN55022: Information Technology Equipment (Emissions)
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard
Product Description Cisco ASR 9000 2-Port 100GE Service Edge Optimized Line Card, Requires CFP optics
Operating temperature (nominal) 41 to 104 F (5 to 40 C)
Chassis compatibility Compatible with the Cisco ASR 9000 Series 22-slot, 10-slot, and 6-slot chassis
Operating humidity (nominal) (relative humidity) 10 to 85%
Options Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card
Immunity Cisco ASR 9000 Series Routers are designed to meet:
IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
IEC/EN-61000-4-5: Signal Ports (1kV)
IEC/EN-61000-4-5: Surge DC Port (1kV)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
Operating temperature (short-term) 23 to 131 F (-5 to 55 C)
Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year (total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period).
Part Number A9K-2X100GE-SE
EMC standards Cisco ASR 9000 Series Routers are designed to meet:
FCC Class A
ICES 003 Class A
AS/NZS 3548 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-2: Power Line Harmonics
IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
Safety Cisco ASR 9000 Series Routers are designed to meet:
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA - Code of Federal Regulations Laser Safety
Network Equipment Building Standards (NEBS) Cisco ASR 9000 Series Routers are designed to meet:
SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection
Operating altitude -60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)
Performance 100-Gbps line-rate throughput per port
  Написать отзыв

Теги: A9K-2X100GE-SE Cisco