+7 (812) 309 34 73. Договоримся!
C1-ASR1001-X/K9 is the ASR1001-X with Cisco ONE Software. Cisco ONE Software suites provide a cost-effective and flexible way for you to acquire software for your data center, routing, switching, and wireless needs.
Cisco ASR 1000-X is designed for high-end enterprise, data center, service provider edging network in order to handle explosive traffic through the network. It supports only software redundancy, and it is based on a Quad-core 2.13GHz processor with 4GB memory, 8GB flash memory, 1 SPA bay, SPA interface processor 10 (SIP10).
Quick Specs
Figure 1 shows the appearance of the C1-ASR1001-X/K9.
Table 1 shows the Quick Specs.
|
Product Code |
C1-ASR1001-X/K9 |
|
Rack Height |
1RU |
|
System Bandwidth |
2.5G (default) / 5G, 10G, 20G (upgrade) |
|
Router Processor (RP) |
Quad-core 2.13Ghz processor |
|
Build-in Gigabit Ethernet port |
6 x SFP ports, 2 x SFP+ ports |
|
Redundancy |
Software (license purchase separately) |
|
SIP and Ethernet line card |
Integrated in chassis; not upgradable |
|
Embedded hardware-based encryption |
up to 8-Gbps crypto support throughput |
|
Rack-mounting |
19-inch |
|
DRAM Memory |
8 GB |
|
Flash Memory |
8 GB |
|
Shared port adapters |
1 SPA slot |
|
External USB flash memory |
1-GB USB flash-memory support |
Product Details
Figure 2 shows the front panel of C1-ASR1001-X/K9.
Note:
① NIM slots
② CON—One mini eUSB por
③ STAT—Status LED
④ CRIT LED—Critical alarm indicator; MAJ LED—Major alarm indicator; MIN LED—Minor alarm indicator
⑤ 6 x SFP ports, 2 x SFP+ ports
⑥ CON—One RJ-45/RS-232 compatible console port
⑦ USB port 1
⑧ USB port 0
⑨ Shared port adapter slot
⑩ MGMT—One RJ-45 10/100/1000 management Ethernet port.
⑪ AUX—One RJ-45/RS-232 compatible auxiliary port
⑫ PWR—Power LED
·Six built-in 1 GE SFP-only interfaces (do not support SFP+), and two built-in 10 GE SFP+ interfaces (support only 10-GE rate)
Table 2 shows some LEDs’ Descriptions.
|
LEDs |
Color |
Description |
|
PWR (Power) |
Solid green |
All power requirements are within specification. |
|
Off |
The router is in standby mode. |
|
|
STAT (System Status) |
Solid green |
Cisco IOSD and other required processes have loaded successfully and are operating. |
|
Yellow |
ROMMON is running (including a permanent failure of RP software) or the Process Manager has declared a critical RP process (including IOSD) dead. A user can log in to recover. |
|
|
Red |
Occurs during system failure or power-up. |
|
|
CRIT (Critical) |
Solid Red |
Functions as a critical alarm indicator. The LED is lso a solid red during the boot process. |
|
MAJ (Major) |
Solid Red |
Major alarm indicator. |
|
MIN (Minor) |
Amber |
Minor alarm indicator. |
Figure 3 shows the back panel of C1-ASR1001-X/K9.
Note：
① Two power supplies, either two AC power supplies or two DC power supplies are accessed from the rear of the router and are hot-swappable.
② Four internal fans draw cooling air into the chassis and across internal components to maintain an acceptable operating temperature.
Datasheet Download
Cisco Router ASR 1000 Series Datasheet.pdf
Get more information
Do you have any question about the C1-ASR1001-X/K9?
Contact us now via Live Chat or info@itg-spb.ru.
C1-ASR1001-X/K9 Specifications |
|
|
Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. |
Height: 1.71 in. (43.43 mm) Width: 17.3 in. (439.42 mm) Depth: 18.17 in. (461.5 mm) Weight: ● 25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. |
|
Default memory |
8-GB DRAM shared across route processor, ESP, and SIP |
|
Number of SIPs or Ethernet line cards supported |
Integrated in chassis |
|
Shared port adapters |
1 single-height SPA slot |
|
Ethernet port adapters |
N/A |
|
Cisco ASR 1000 Series ESP |
Integrated in chassis |
|
Route processor |
Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor |
|
Redundancy |
Software: Yes |
|
Built-in Gigabit Ethernet ports |
Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports |
|
Built-in 10 Gigabit Ethernet port |
Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports Note:Built-in 10-GB ports cannot be reduced to 1-GB speed. |
|
Network interface module |
Yes |
|
Cisco ASR 1000 Series |
Cisco ASR 1001-X |
|
ESP support |
Cisco ASR 1000 Series 2.5-Gbps ESP (default) Upgradable through a software-activated feature license to 5, 10, or 20 Gbps |
|
ESP bandwidth |
2.5 to 20 Gbps |
|
ESP memory |
Share the same control memory on route processor |
|
SIPs and Ethernet line cards |
Integrated in chassis; not upgradable |
|
Embedded hardware-based encryption |
Yes: Up to 8-Gbps crypto support throughput |
|
Minimum Cisco IOS XE Software release |
Cisco IOS XE Software Release 3.12.0 |
|
Rack-mounting |
Yes: 19-inch |
|
Wall-mounting |
No |
|
External USB flash memory |
1-GB USB flash-memory support |
|
Redundant power supply |
Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported. |
|
Power input |
Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72V; 48V nominal) |
|
Power consumption |
● Maximum (DC): 242W ● Maximum (AC): 250W ● Maximum (out): 250W |
|
Airflow |
Front-to-back |
|
Operating temperature (nominal) |
32 to 104°F |
|
Operating temperature (short-term) |
32 to 122°F |
|
Operating humidity (nominal) (relative humidity) |
10 to 85% |
|
Operating humidity (short-term) |
5 to 90% |
|
Storage temperature |
-40 to 150°F (-40 to 70°C) |
|
Storage humidity (relative humidity) |
5 to 95% |
|
Operating altitude |
-500 to 10,000 feet |
|
Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 (in progress) |
|
EMC standards |
● FCC 47 CFR Part 15 Class A ● VCCI Class A ● AS/NSZ Class A ● ICES-003 Class A ● EN55022/CISPR 22 Information Technology Equipment (Emissions) ● EN55024/CISPR 24 Information Technology Equipment (Immunity) ● EN300 386 Telecommunications Network Equipment ● (EMC) ● EN50082-1/EN61000-6-1 Generic Immunity Standard |
|
Safety Standard |
UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1 |
| Характеристики | |
| Airflow | Front-to-back |
| Built-in 10 Gigabit Ethernet port | Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) portsNote:Built-in 10-GB ports cannot be reduced to 1-GB speed. |
| Built-in Gigabit Ethernet ports | Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports |
| Cisco ASR 1000 Series | Cisco ASR 1001-X |
| Cisco ASR 1000 Series ESP | Integrated in chassis |
| Default memory | 8-GB DRAM shared across route processor, ESP, and SIP |
| Embedded hardware-based encryption | Yes: Up to 8-Gbps crypto support throughput |
| EMC standards | ● FCC 47 CFR Part 15 Class A● VCCI Class A● AS/NSZ Class A● ICES-003 Class A● EN55022/CISPR 22 Information Technology Equipment(Emissions)● EN55024/CISPR 24 Information Technology Equipment(Immunity)● EN300 386 Telecommunications Network Equipment● (EMC)● EN50082-1/EN61000-6-1 Generic Immunity Standard |
| ESP bandwidth | 2.5 to 20 Gbps |
| ESP memory | Share the same control memory on route processor |
| ESP support | Cisco ASR 1000 Series 2.5-Gbps ESP (default)Upgradable through a software-activated feature license to 5, 10, or 20 Gbps |
| Ethernet port adapters | N/A |
| External USB flash memory | 1-GB USB flash-memory support |
| Minimum Cisco IOS XE Software release | Cisco IOS XE Software Release 3.12.0 |
| Network Equipment Building Standards (NEBS) | GR-1089 and GR-63 (in progress) |
| Network interface module | Yes |
| Number of SIPs or Ethernet line cards supported | Integrated in chassis |
| Operating altitude | -500 to 10,000 feet (152 to 3048 meters) |
| Operating humidity (nominal) (relative humidity) | 10 to 85% |
| Operating humidity (short-term) | 5 to 90% |
| Operating temperature (nominal) | 32 to 104°F (0 to 40°C) |
| Operating temperature (short-term) | 32 to 122°F (0 to 50°C) |
| Physical specificationsNote: Depth applies to chassis edge-to-ed | Height: 1.71 in. (43.43 mm)Width: 17.3 in. (439.42 mm)Depth: 18.17 in. (461.5 mm)Weight:● 25 lb (11.35 kg) fully loadedNote: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. |
| Power consumption | ● Maximum (DC): 242W● Maximum (AC): 250W● Maximum (out): 250W |
| Power input | Worldwide ranging AC input range (85 to 264 VAC)Worldwide ranging DC(-40 to -72V; 48V nominal) |
| Rack-mounting | Yes: 19-inch |
| Redundancy | Software: Yes |
| Redundant power supply | Yes: Dual power supplies by default; option of either AC or DC power supplyNote: A mix of one AC and one DC power supply is not supported. |
| Route processor | Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor |
| Safety Standard | UL60950-1CSA C22.2 No. 60950-1-03EN 60950-1IEC 60950-1AS/NZS 60950.1 |
| Shared port adapters | 1 single-height SPA slot |
| SIPs and Ethernet line cards | Integrated in chassis; not upgradable |
| Storage humidity (relative humidity) | 5 to 95% |
| Storage temperature | -40 to 150°F(-40 to 70°C) |
| Wall-mounting | No |
Теги: C1-ASR1001-X/K9 Cisco