По запросу
Сроки: 14 дней
Нашли дешевле?
+7 (812) 309 34 73. Договоримся!
Общая информация (VWIC3-2MFT-T1/E1)
Cisco third generation Voice & WAN T1/E1 interface card supports voice and data application on Cisco ISR 2 1900/2900/3900 series platform. This module integrate with 2 T1/E1 interfaces, one port can configure for unstructured E1 (G.703) while configuring the other for structured framed E1 to support both Voice and WAN connectivity via one interface module.
Specification | |
T1 Support | Yes |
E1 Support | Yes |
Unstructured E1 (G.703) Support | No |
Data Support WIC Mode | Yes |
Voice Support VIC* | Yes |
Drop-and-Insert Multiplexing | Yes |
Serial Data (channel-group*) | 2 total 2 per port |
Voice CAS (ds0-group**) | 48 total (T1) 62 total (E1) 1 per timeslot |
PRI (pri-group***) | 2 total 1 per port |
Drop & Insert (tdm-group****) | 48 total (T1) 62 total (E1) 1 per timeslot |
Telnet or Console | Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Software CLI |
SNMP Traps | Generated in response to alarms |
Number of Ports | 2 |
Part Number | VWIC3-2MFT-T1/E1 |
Simple Network Management Protocol (SNMP) | • Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network entity to user • Standard MIB (MIB II) • Cisco Integrated DSU/CSU MIB • RFC 1406 T1 MIB, Including Alarm Detection and Reporting |
Device Type | Interface module |
Form factor | 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card |
Manufacturer | Cisco |
Теги: VWIC3-2MFT-T1/E1 Cisco