+7 (812) 309 34 73. Договоримся!
Общая информация (NPE-G1)
To continue to meet the increasing needs for performance while maintaining exceptional value and flexibility,
the Cisco® 7200 Series introduces its newest processor-the NPE-G1 (Figure 1). The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) addresses the demand for performance and flexibility by doubling its processing capacity and enabling unprecedented LAN performance. Benefits of the NPE-G1 include the following:
• Provides performance of up to 1 million packets per second (PPS) in Cisco Express Forwarding switching (an increase of up to 250 percent over the Cisco 7200 Series NPE-400)
• Offers three Gigabit Ethernet/Fast Ethernet ports that do not take up bandwidth points
• Doubles the amount of available DRAM (to 1 GB)
• Eliminates the requirement for an input/output (I/O) controller
• Eliminates I/O controller LAN interface bandwidth points
• Provides modular processors and the ability to upgrade
• Offers improved price performance
Specification | |
Compatible Slots | None |
Manufacturer Part # | 7200VXR NPE-G1 |
Approximate Depth | 17.0 in |
Approximate Height | 5.2 in |
Power Provided | 370 Watt |
Enclosure Type | Rack-mountable – Modular - 3 nm |
Approximate Width | 16.8 in |
Min Operating Temperature | 32 °F |
Max Operating Temperature | 104 °F |
Humidity Range Operating | 10 - 90% |
RAM Installed ( Max ) | 256 MB (installed) / 1 GB (max) - DDR SDRAM |
Installed Modules Qty (Max) | 1 (installed) / 8 (max) |
Device Type | Router - with Cisco 7200 Series Network Processing Engine NPE-G1 |
Data Transfer Rate | 1 Gbps |
Connectivity Technology | Wired |
Data Link Protocol | Ethernet, Fast Ethernet,Gigabit Ethernet |
Network / Transport Protocol | UDP/IP, TCP/IP |
Voltage Required | AC 120/230 V |
Manufacturer | Cisco |
Routing Protocol | BGP, EIGRP, RIP, IS-IS, HSRP, IGRP, OSPF |
Remote Management Protocol | Telnet, SNMP |
Authentication Method | CHAP, PAP, TACACS, RADIUS |
Features | Full duplex capability, VLAN support, RARP support, Modular design, DHCP support, NAT support |
Interfaces | 3 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45, Management : 1 x Console, Management : 1 x Auxiliary, 3 x GBIC |
Compliant Standards | CSA 22.2 No. 950, FCC Class A certified, EN 60950, EN55022, VCCI Class B ITE, IEC950, UL 1950 |
Expansion Slot(s) | 8 (total) / 7 (free) x Expansion slots, 2 (total) / 0 (free) x Memory, 1 CompactFlash Card |
Power Device | Power supply - hot-plug / redundant Plug-in module |
Flash Memory | 64 MB (installed) / 256 MB (max) |
Теги: NPE-G1 Cisco