170 063.13 Рубль
Сроки: 14 дней
Нашли дешевле?
+7 (812) 309 34 73. Договоримся!
Рекомендуемые товары
Общая информация (WS-X6816-10G-2T)
WS-X6816-10G-2T is 16-port 10 Gigabit Ethernet Fiber Module for Cisco Catalyst 6500 E-series switch with exclusively supported by Supervisor Engine 2T. WS-X6816-10G-2T equipped with WS-F6K-DFC4-E daughter card to deliver optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding, and makes this module ideally suited for deployment in access and aggregation network in campus and data center.
| Specification | |
| X2 Pluggable Optics part number | X2-10GB-LRM(multimode fiber): 1310 nm serial, 220m over multimode fiber X2-10GB-LR(single-mode fiber): 1310 nm serial, 10 km over single-mode fiber X2-10GB-ER(single-mode fiber): 1550 nm serial, 40 km over single-mode fiber X2-10GB-SR(multimode fiber): 850 nm serial, up to 300m over multimode fiber X2-10GB-LX4(multimode fiber): WWDM 1310 nm, up to 300m over multimode fiber X2-10GB-ZR: 1550 nm serial, 80 Km over single-mode fiber |
| Devide Tyde | 10 Gigabit Ethernet interface Fiber module |
| Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6816-10G-2T |
| Supervisor engines supported | Cisco Catalyst 6500 Series Supervisor Engine VS-S2T-10G |
| Switch fabric connection | 2 * 20 Gbps (40 Gbps total ) |
| Forwarding Engine | WS-F6K-DFC4-E |
| ACL entries | 64,000 |
| Netflow entries | 512,000 |
| Bridge Domains | 16,000 |
| MAC address | 128,000 |
| Multicast routing | 256,000 |
| IPv4 forwarding speed | 60 Mpps |
| Queues | Oversubscription mode Receive: 1 priority queue, 7 round robin queues, 2 threshold per port Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group Performance mode: Receive: 8 priority queue, 4 threshold per port Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group |
| Scheduler | Oversubscription mode: DWRR WRED Performance mode: DWRR WRED SRR at egress |
| Virtual Switch Link (VSL) | Oversubscription mode: No Performance mode: Yes (Up to 4 10 Gigabit Ethernet ports can be used for virtual switch link) |
| Routing entries | 256,000 |
| Port buffers | Oversubscription mode: 90 MB per port group Performance mode: 256 MB per port (128 MB for ingress and 128 MB for egress) |
| Queuing Mechanisms | CoS-based queue mapping DSCP-based queue mapping |
| Hardware-based Multicast replication | Ingress and egress Approximately 20 GB per replication engine 2 replication engines per module |
| Jumbo frame support for bridged and routed packets | Up to 9216 bytes |
| Maximum port density per chassis | 176 ports (6513-E chassis) 128 ports (6509-E chassis) |
| Maximum port density per VSS | 352 ports |
| Chassis supported | Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS compliant) and 6513-E chassis Not supported in non-E Series chassis |
| Slot requirements | Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis |
| Onboard memory | 1 GB default |
| Power requirement | 488.5 Watts |
| Model info: | WS-X6816-10G-2T |
| Ports | 16 * 10G X2 ports |
Теги: WS-X6816-10G-2T Cisco