Aruba Q9H64A

Производитель: Aruba

Код товара: Aruba Q9H64A

0 отзывов

Артикул:

По запросу

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Aruba Q9H64A is an Aruba AP-514 (EG) TAA Dual Radio 4x4:4 + 2x2:2 802.11ax External Antennas Unified Campus AP.

Quick Spec

Table 1 shows the quick spec.

Model	Q9H64A
AP type	Indoor AP
IEEE	802.11ax
Antennas Type	Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.
Supported frequency bands (country-specific restrictions apply)	2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz

Product Details

The Aruba 510 series access points with 802.11ax (Wi-Fi 6), combined with Aruba intelligent software innovations, are designed to deliver high performance connectivity for mobile and IoT devices in any environment.

The 510 series is designed to simultaneously serve multiple clients and traffic types in dense environments, and boosts overall network performance by up to 4X versus 802.11ac APs.

In addition to 802.11ax benefits, the 510 Series also provide Aruba differentiated capabilities that include AI-powered RF optimization, always-on connectivity, WPA3 certified security, and unified wired and wireless policy with Dynamic Segmentation.

Additionally, Green AP mode for 802.11ax APs also leverages AI/ML capabilities for energy savings of up to 70%.

Aruba 510 provides these features:

High efficiency

802.11ax OFDMA and MU-MIMO efficiently and simultaneously service multiple clients to provide a good experience in high density environments.

Unsurpassed client performance

Aruba’s ClientMatch feature intelligently groups Wi-Fi 6 clients onto the best AP’s to leverage 802.11ax multi-user capabilities.

IoT ready access points

Leverage your Wi-Fi infrastructure to support Zigbee and Bluetooth devices and applications.

Compare to Similar Items

Table 2 shows the comparison.

Model	Q9H64A	Q9H71A
AP type	Indoor AP	Indoor AP
IEEE	802.11ax	802.11ax
Antennas Type	Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.	Four integrated dual-band downtilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.2dBi in 2.4GHz and 7.5dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz.
Supported frequency bands (country-specific restrictions apply)	2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz	2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz

Get More Information

Do you have any question about the Q9H64A?

Q9H64A Specification
AP type	Indoor AP
IEEE	802.11ax
Antennas Type	Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.
Supported frequency bands (country-specific restrictions apply)	2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz
Wi-fi Radio	5GHz radio: - Four spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max) - Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) - Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max) - Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) 2.4GHz radio: - Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max) - Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
Supported data rates (Mbps)	- 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) - 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40) - 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160) - 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) - 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)
Additional Interfaces	E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps) - Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX - 2.5Gbps speed complies with NBase-T and 802.3bz specifications - POE-PD: 48Vdc (nominal) 802.3af/802.3at POE E1: 10/100/1000BASE-T Ethernet network interface (RJ-45) - Auto-sensing link speed and MDI/MDX Link aggregation (LACP) support between both network ports for redundancy and increased capacity DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector) - Capable of sourcing up to 1A / 5W to an attached device Bluetooth 5 and Zigbee (802.15.4) radio - Bluetooth: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity - Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity - Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514) Visual indictors (two multi-color LEDs): for System and Radio status Reset button: factory reset, LED mode control (normal/off) Serial console interface (proprietary, micro-B USB physical jack) Kensington security slot
Maximum (worst-case) power consumption	- DC powered: 16W - POE powered (802.3af, IPM enabled): 13.5W - POE powered (802.3at/bt): 20.8W - All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered).
Operating conditions	- Temperature: 0°C to +50°C / +32°F to +122°F - Humidity: 5% to 93% non-condensing - AP is plenum rated for use in air-handling spaces - ETS 300 019 class 3.2 environments
Storage and transportation conditions	- Temperature: -40°C to +70°C / -40F to +158°F - Humidity: 5% to 93% non-condensing - ETS 300 019 classes 1.2 and 2.3 environments

Характеристики
Additional Interfaces	E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)- Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX- 2.5Gbps speed complies with NBase-T and 802.3bz specifications- POE-PD: 48Vdc (nominal) 802.3af/802.3at POEE1: 10/100/1000BASE-T Ethernet network interface (RJ-45)- Auto-sensing link speed and MDI/MDXLink aggregation (LACP) support between both network ports for redundancy and increased capacityDC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm lengthUSB 2.0 host interface (Type A connector)- Capable of sourcing up to 1A / 5W to an attached deviceBluetooth 5 and Zigbee (802.15.4) radio- Bluetooth: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity- Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity- Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514)Visual indictors (two multi-color LEDs): for System and Radio statusReset button: factory reset, LED mode control (normal/off)Serial console interface (proprietary, micro-B USB physical jack)Kensington security slot
Antennas Type	Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors(due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.
AP type	Indoor AP
IEEE	802.11ax
Maximum (worst-case) power consumption	- DC powered: 16W- POE powered (802.3af, IPM enabled): 13.5W- POE powered (802.3at/bt): 20.8W- All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered).
Operating Conditions	- Temperature: 0°C to +50°C / +32°F to +122°F- Humidity: 5% to 93% non-condensing- AP is plenum rated for use in air-handling spaces- ETS 300 019 class 3.2 environments
Storage and transportation conditions	- Temperature: -40°C to +70°C / -40F to +158°F- Humidity: 5% to 93% non-condensing- ETS 300 019 classes 1.2 and 2.3 environments
Supported data rates (Mbps)	- 802.11b: 1, 2, 5.5, 11- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54- 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)- 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40)- 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)- 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)
Supported frequency bands (country-specific restrictions apply)	2.400 to 2.4835GHz5.150 to 5.250GHz5.250 to 5.350GHz5.470 to 5.725GHz5.725 to 5.850GHz
Wi-fi Radio	5GHz radio:- Four spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max)- Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)- Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)- Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)2.4GHz radio:- Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max)- Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Написать отзыв

Теги: Q9H64A Aruba

Корзина покупок