Huawei S5700-52C-SI
  +7 (812) 309 34 73

по будням с 10:00 до 18:00

S5700-52C-SI

Производитель: Huawei
Код товара: Huawei S5700-52C-SI
Артикул:

72 775.98 Рубль

Сроки: 14 дней
Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Характеристики
Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm
Extended slots two extended slots, one for an uplink subcard and the other for a stack card
Fixed ports 48 × 10/100/1,000 Base-T
Forwarding Performance 132 Mpps
Input voltage AC:Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 HzDC:Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72VNote: PoE-support switches do not use DC power supplies.
Interoperability Supports VBST (Compatible with PVST/PVST+/RPVST)
IP Routing Static route, RIPv1, RIPv2, RIPng, and ECMP
IPv6 features Neighbor Discovery (ND)Path MTU (PMTU)IPv6 ping, IPv6 tracert, and IPv6 TelnetACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol typeMLD v1/v2 snooping6to4 tunnel, ISATAP tunnel, and manually configured tunnel
MAC Address Table IEEE 802.1d compliance16K MAC address entriesMAC address learning and agingStatic, dynamic, and blackhole MAC address entriesPacket filtering based on source MAC addresses
Management and Maintenance StackingMAC Forced Forwarding (MFF)Virtual cable testSNMP v1/v2c/v3RMONWeb-based NMSSystem logs and alarms of different levels
Multicast IGMP v1/v2/v3 snooping and IGMP fast leaveMulticast forwarding in a VLAN and multicast replication between VLANsMulticast load balancing among member ports of a trunkControllable multicastPort-based multicast traffic statistics
Operating Environment Operating temperature: 0°C to 50°CRelative humidity: 5% to 95% (non-condensing)
Power consumption
QoS/ACL Rate limiting on packets sent and received by an interfacePacket redirectionPort-based traffic policing and two-rate three-color CAREight queues on each portWRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithmsRe-marking of the 802.1p priority and DSCP priorityPacket filtering at Layer 2 to Layer 4, filtering out invalid frames based on the sourceMAC address, destination MAC address, sourceIP address, destination IP address, TCP/UDP port number, protocol type, and VLAN IDRate limiting in each queue and traffic shaping on ports
Reliability RRPP ring topology and RRPP multi-instanceSmart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchoverSEPERPS (G.8032)STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)BPDU protection, root protection, and loop protection
Security User privilege management and password protectionDoS attack defense, ARP attack defense, and ICMP attack defenseBinding of the IP address, MAC address, interface, and VLANPort isolation, port security, and sticky MACBlackhole MAC address entriesLimit on the number of learned MAC addresses802.1x authentication and limit on the number of users on an interfaceAAA authentication, RADIUS authentication, HWTACACS+ authentication, and NACSSH v2.0Hypertext Transfer Protocol Secure (HTTPS)CPU defenseBlacklist and whitelist802.1x authentication, MAC address authentication, and combined authentication on a per port basisPortal authentication on a per VLANIF interface basis
Switching capacity 256 Gbit/s
VLAN 4K VLANsGuest VLAN and voice VLANGVRPMUX VLANVLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports1:1 and N:1 VLAN Mapping
  Написать отзыв